Reliable 300CU Use and Care Manual download pdf (Page 17)

CLEANING AND MAINTENANCE

EMPTYING AND CLEANING THE INSIDE OF THE BOILER TANK

IMPORTANT: Clean the boiler tank at least once every month so as to remove any

scale residues which might affect the normal operation of the appliance.

• Switch off the appliance

• Bleed out any pressure remaining in the boiler tank (L) using the steam button

(A) on the gun (C), pointing the jet into a suitable container.

• Unplug it from the main power and leave it to cool before cleaning out the

boiler tank, so as to avoid the risk of scalds.

• Slowly unscrew the boiler tank ﬁller cap (M) and remove it completely.

• Slowly add tap water to the boiler tank (L) to prevent any spurts of steam;

shake the appliance and turn it upside down to empty it. Repeat the operation

several times.

WARNING: Never add scale removers, vinegar or other perfumed substances to

the tank, as these risk damaging the appliance with immediate cancellation of the

warranty.

TROUBLESHOOTING

No steam comes

out of the nozzle

The nozzle is

dispensing little

steam

Problem Check Possible Causes Possible Remedy

Steam ready light

(H) off

Steam ready light

(H) on

Steam ready light

(H) on – Water in

the boiler tank (L)

Steam lock (B)

Steam ready light

(H) on

Cold boiler tank

No water in the

boiler tank (L)

Malfunction

In use locked

Cold boiler tank

Steam regulation

dial (K) set to

minimum

Wait for the

steam ready light

to switch on (H)

Reﬁll the tank, as

described in the

paragraph

“INSTRUCTIONS

FOR USE”

Contact an assis-

tance centre

Unlock

Wait for the

boiler tank (L) to

heat up

Use the relevant

dial (K) to regu-

late the steam

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comments to this Manuals

No comments

Reliable 300CU Use and Care Manual Page 17

Comments to this Manuals

Related products and manuals for Steam cleaners Reliable 300CU